毕业论文论文范文课程设计实践报告法律论文英语论文教学论文医学论文农学论文艺术论文行政论文管理论文计算机安全
您现在的位置: 毕业论文 >> 论文 >> 正文

红外无线遥控发射机的设计+红外发射程序+硬件仿真

更新时间:2016-9-20:  来源:毕业论文

红外无线遥控发射机的设计+红外发射程序+硬件仿真 摘  要:针对传统控制模式无法满足当代社会需求的现状以及拖缆式遥控装置带来的故障隐患问题,提出了无线遥控发射机控制方法来解决上述问题。本文主要介绍了以AT89C51为核心的红外发射电路,以按键、数码管显示、稳压电源为辅的红外无线遥控发射机的设计方案。经过实际仿真调试,很好的完成了无线遥控发射机的设计,实现了无线遥控的功能,使人可以间接进行操作控制。所设计的发射机具有体积小、成本低、功耗小、实用性强,应用前景广阔的特点。
关键词:无线遥控;AT89C51;红外;发射机

The Design of Wireless Remote Control Transmitter
Abstract: According to the problem that traditional control mode can not meet the need of contemporary society. And that wired devices for remote control might bring hidden trouble. For reason given above, I put forward the view of the design of wireless remote control transmitter to solve the above problem. This paper mainly introduces the infrared remote-control transmitter which uses AT89C51 as the main part. In addition the design consists of buttons, nixie tube and power. After simulation and debugging in practical terms, the design has accomplished well and realizes the function of control in the distance. It makes people do something indirectly. The design has the advantages of small size, low cost, low power consumption and good practicability. The design also has a wide prospect of application.
Key Words: Wireless remote control; AT89C51; Infrared; Transmitter
目    录

摘要 1
引言 1
1.无线遥控发射机的研究背景和现状 2
1.1无线遥控发射机的应用 2
1.2无线遥控发射机的分类 2
2.方案论证 3
2.1电波遥控发射机方式 3
2.2红外遥控发射机方式 5
2.3方案选择 6
3.硬件电路设计 6
3.1键盘模块 7
3.2电源 8
3.3AT89C51 9
3.4红外发射电路模块 11
3.5显示模块 12
4.软件设计 12
4.1NEC协议 12
4.2按键扫描流程图 13
4.3发送流程图 13
4.4主函数流程图 15
5.系统调试 15
5.1硬件调试 15
5.2软件调试 16
6.总结 16
参考文献 17
附录 18
附录1:红外发射程序 18
附录2:硬件仿真 25
致谢 28,3087

[1] [2] [3] [4] [5] [6] [7] 下一页

红外无线遥控发射机的设计+红外发射程序+硬件仿真下载如图片无法显示或论文不完整,请联系qq752018766
设为首页 | 联系站长 | 友情链接 | 网站地图 |

copyright©lwfree.cn 六维论文网 严禁转载
如果本毕业论文网损害了您的利益或者侵犯了您的权利,请及时联系,我们一定会及时改正。