The Structure Design of Shanghai Jiufu apartment of Xinzhong housing estate
Abstract：The project which has been designed is the structure design of Shanghai Sanzao Industrial Park supporting architectural and structural design of comprehensive office building. The structure of building is cast-in-place reinforced concrete frame system. Roof and floor cast-in-situ type structure. It has 6 floors on the ground.Its height is 21.9 meters. The design mainly includes the structure design. The structural design process mainly concludes three steps: choosing the structural program, structural calculation and structure drawing. First, a suitable program was established. The structural arrangement should make the plane shape and bodily form simple and regulate. So, the stiffness of each part will be uniform and symmetry. In this way, the possibility of distortion will be reduced. Structural calculation involves the following contents: framework, slab, foundation and stairs. One frame was chosen to compute. Then structural design software—PKPM was used to calculate the structure on the ground. The structural drawings were drawn according to the calculated results. 源自六/维"论\文|网.加7位QQ3249"114 www.lwfree.cn
KeyWords：office building；cast-in-place reinforced concrete frame system; structure design;

[摘要]3
1. 建筑设计部分.4
1.1设计依据.4
1.2工程概况.4
1.3建筑设计.4
1.4一些主要的建筑做法.4
1.5门窗工程.6
1.6消防防火.6
1.7其他.6
2.结构设计部分7
2.1设计依据.7
2.1.1工程设计使用年限.7
2.1.2自然条件.7
2.2设计要求.7
2.2.1抗震设防要求.7
2.2.2设计荷载.7
2.2.3设计规范及规程.7
2.3结构方案.8
2.3.1结构选型.8
2.3.2结构布置.8
2.3.3基础形式.8
2.4主要材料.8
2.4.1混凝土强度等级.8
2.4.2钢材.8
2.4.3钢筋接头形式.8
2.4.4混凝土保护层厚度.8
2.4.5围护结构及隔墙.8
2.5梁、板、柱截面选择.9
3．荷载计算.10
3.1竖向荷载计算 10
3.1.1楼面活荷载 10
3.1.2 屋面荷载（非上人屋面）10
3.1.3 屋面荷载（非上人屋面）10
3.2 线荷载计算11
3.2.1 梁上线荷载11
4．结构电算.12
4.1 结构设计信息12
4.2 周期、震型与地震力24
4.3结构位移.38
5．楼板计算.50
5.1设计资料.50